Partwork, an on-demand sheet metal fabrication and CNC machining platform in India, made ten SS304 sheet metal parts for a dairy machinery manufacturer based in Cyprus. The parts were made and delivered in India in 6 days, with bend angles and dimensions checked before dispatch.
Key facts
| Item | Detail |
|---|---|
| Customer | Dairy machinery manufacturer, Cyprus (name withheld) |
| Parts | 5 designs, 2 pieces each (10 in total) |
| Material | SS304 stainless steel, 2 mm |
| Largest part | 1100 mm × 1500 mm |
| Requirement | Precise bend angles and dimensions |
| Lead time | 6 days, made and delivered in India |
| Inspection | Bend angles and dimensions checked before dispatch |
The brief
The customer builds machinery for the dairy industry. They needed five formed SS304 parts, two of each, and the drawings left little room: bend angles and overall dimensions both had to hold.
SS304 is a common choice for dairy and food equipment because it resists corrosion and cleans well. Formed parts like these go into assemblies, where a bend that is a degree off or a flange that is a millimetre long shows up at fit-up. A rejected batch costs the customer days and a second round of fabrication.
Why these parts were hard to get right
Two things decide whether a bent part matches its drawing, and they pull against each other.
The bend angle depends on springback. Metal relaxes after forming, so the press brake has to overbend by a controlled amount. SS304 springs back more than mild steel, which makes that allowance larger and less forgiving.
The finished dimensions depend on the flat pattern. Each bend consumes a calculated length of material, the bend allowance, and an error there moves every dimension after that bend.
Size added to it. Panels of 2 mm stainless up to 1100 mm by 1500 mm are harder to hold flat and to handle without marking the surface. Each of the five designs also had its own bend sequence, setup and flat pattern.
How the order ran
The order went from drawings to delivered parts in 6 days.
- Manufacturability check. The drawings were reviewed for bend radii, reliefs, flat patterns and tolerances before any material was cut.
- Matched to a vetted shop. The job went to a partner equipped for 2 mm stainless at this size.
- Cut and formed. All ten pieces were cut and bent to the drawings.
- Inspected. Bend angles and dimensions were checked before dispatch.
- Delivered. The parts were delivered in India, 6 days after the order.
Outcome
All ten pieces were made, inspected and delivered within 6 days.
For a machine builder sourcing from abroad, the fabrication itself is only part of the job. What Partwork adds is the layer around it: a manufacturability check, a vetted shop, inspection before dispatch, and one point of accountability from drawing to delivery.
If you build machinery and need formed sheet metal parts, upload your drawing or STEP file at partwork.io to get a quote.